Plant managers and industrial buyers expanding an existing Lista HS or SC modular drawer cabinet fleet need an objective, specification-level comparison before committing to multi-cabinet MRO walls or CNC tool cribs. Both platforms belong to the true heavy-duty industrial drawer class—far above commercial garage tool chests—yet differ in dimensional standardization, lead-time responsiveness, and factory configuration workflow.
Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project.
Side-by-Side Engineering Comparison: MDC Series vs. Lista HS / SC
| Engineering Parameter | MD-9D400 / MD-CNC40 (MDC Systems) | Lista HS / SC Heavy-Duty Series | Practical Shop-Floor Impact |
|---|---|---|---|
| Per-Drawer Load Rating | 400 lb (181 kg) uniform static load across all drawer heights | 440 lb (200 kg) uniform load rating | Both comfortably cover full steel fastener, valve, and CAT50/BT40 CNC tooling loads |
| Drawer Extension | 100% full extension telescopic precision ball-bearing slides | 100% full extension roller carriage suspension | Identical unobstructed overhead access to rear drawer corners |
| Anti-Tip Safety Interlock | Mechanical single-drawer-at-a-time safety interlock (standard) | PrevenTip one-drawer-at-a-time safety interlock | Equivalent mechanical prevention of simultaneous multi-drawer tip-over |
| Housing Footprints | 30” × 28.5” standard (33”, 44”, 59” H); optional 36” & 44” W | 28.25” × 28.5” (SC/HS), 40.25” W (NW), 56.25” W (DW) | Matching 28.5” depth allows flush front-face aisle alignment in existing rows |
| Interior Partition Grid | 1” (25 mm) slotted sidewalls + galvanized partitions, dividers & bins | Slotted sidewalls + metal partitions, dividers & plastic boxes | Both allow tool-less interior reconfiguration as MRO SKUs evolve |
| CNC Tool Holder Storage | Dedicated MD-CNC40 for BT30/BT40/CAT40/CAT50/HSK63-100 | Dedicated CNC tool holder frames & tapered inserts | Direct drop-in capability for mixed machining-cell spindle standards |
| Quotation & CAD Drawing | 15-Minute Formal Quote & drawer layout approval sheet | Regional distributor / channel quotation workflow | Faster project budgeting and multi-bay BOM approval |
Evaluating 400 lb vs. 440 lb Real-World Drawer Loads
In practice, only solid lead, tungsten carbide bars, or stacked steel press dies approach 400 lb inside a single 30” × 28.5” drawer footprint. A fully loaded 5” fastener drawer typically weighs 180 to 275 lb (82–125 kg), and a dense 42-socket BT40/CAT40 CNC tool tray averages 260 to 320 lb (118–145 kg). At 400 lb (181 kg) uniform static rating with 100% full extension, the MD-9D400 maintains a wide structural safety margin across standard MRO, aviation, and CNC workloads.
When Expanding an Existing Lista Installation
- Depth Alignment: Match our standard 28.5” (724 mm) exterior depth with Lista 28.5”-deep housings so cabinet fronts sit flush along the aisle with zero protruding trip corners.
- Color & Finish Coordination: Specify standard RAL 5015 industrial slate blue, RAL 7035 light gray, or custom plant RAL powder coats to blend seamlessly with existing facility banks.
- Worktop Continuity: Pair MD-5D400 (33” H) or MD-7D400 (44” H) pedestals with matching 1.75” maple butcher-block or stainless-steel tops.
- Independent Multi-Brand Benchmarks: Also review our vs Stanley Vidmar and vs Rousseau specifications if your facility operates mixed vendor lines.
Request a 15-Minute Lista Cross-Reference Quote
Send your existing Lista model numbers, drawer height stack (e.g., 75/100/150/200 mm), divider compartment count, and delivery postal code via our 15-Minute Formal Quote brief for an itemized dimensional cross-reference and formal quotation within 15 minutes.
Standard & Custom-Engineered Models
59" 9-Drawer 400 lb/Drawer Heavy-Duty Modular Cabinet
Flagship 59" (1,500 mm) 9-drawer heavy-duty cabinet with 400 lb (181 kg) per-drawer load rating, 100% full extension slides, and anti-tip interlock for MRO parts walls.
Full Datasheet →CNC BT30/BT40/CAT40/HSK Tool Holder Storage Cabinet
Dedicated 59" CNC tool holder storage cabinet engineered for BT30, BT40, CAT40, CAT50, and HSK63/100 tapers on 400 lb 100% full-extension trays.
Full Datasheet →44" 7-Drawer Counter-Height 400 lb MRO Cabinet
44" (1,120 mm) standing counter-height 7-drawer MRO cabinet rated to 400 lb (181 kg) per drawer with 2,800 lb total capacity and top parts-issue deck.
Full Datasheet →