Dual-Unit Technical Specifications (MD-7D400)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| External Dimensions (W × D × H) | 30.0" × 28.5" × 44.0" (762 × 724 × 1,120 mm) | Standing elbow-level counter height; aligns cleanly in multi-cabinet MRO issue counters |
| Drawer Count & Usable Heights | 7 Drawers: 2× 3" (75 mm), 3× 5" (125 mm), 1× 7" (175 mm), 1× 10" (250 mm) | 38" (965 mm) total usable drawer stack; custom 5–9 drawer distributions available |
| Per-Drawer Load Capacity | 400 lb (181 kg) uniform static load | Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project |
| Total Cabinet Payload | 2,800 lb (1,270 kg) across 7 drawers | Seam-welded 14-gauge heavy-duty steel frame with reinforced corner channels |
| Top Work Surface Options | 3-sided steel retainer lip with ribbed oil-resistant mat (standard) | Optional 1.75" (44 mm) laminated maple butcher-block or 304 stainless-steel continuous counter |
| Slide & Interlock System | 100% full extension ball-bearing slides + single-drawer anti-tip interlock | Central keyed lock secures all 7 drawers in one turn |
| Interior Partition Matrix | 1" (25 mm) slotted walls across all 7 drawers | Supports up to 240+ individual fastener, O-ring, and electrical-component sub-compartments |
| Base Interface | 4" (102 mm) welded forklift base with recessed toe kick | Bolts side-by-side into continuous 3- to 12-cabinet issue counters |
Target Applications & Operating Fit
- MRO parts-issue counters and tool cribs where technicians need a standing 44" write-up and inspection surface above high-density parts drawers
- Quality-control metrology benches and calibration rooms storing micrometers, thread gauges, and granite surface-plate accessories
- Electrical maintenance and PLC spare-parts rooms separating relays, contactors, sensors, and cable lugs into labeled modular dividers
- Service counters in heavy-equipment dealerships and fleet maintenance depots requiring open sightlines across the shop floor
Structural & Standards Engineering
- Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project
- 44" (1,120 mm) height preserves clear visual supervision across open shop bays while packing 7 full-capacity drawers beneath the counter
- Standard 3-sided steel retainer top with ribbed nitrile mat stops round parts, gauges, and fasteners from rolling off the back
- Pre-drilled side bolting knockouts allow multiple MD-7D400 units to join under one continuous stainless or butcher-block counter
- Full-width ergonomic handles with angled transparent label shields speed SKU verification during shift handovers
5-Parameter Engineering Modification Scope
- Continuous 2-, 3-, or 4-cabinet spanning countertops in 1.75" maple butcher block, ESD laminate, or 14-gauge 304 stainless steel
- High-density small-parts bin box packs (3"×3", 3"×6", 6"×6" lift-out polypropylene cups) for top 3" drawers
- ESD-safe dissipative powder coat and grounding lug kit for electronics, avionics, and instrumentation cribs
- Keyed-alike counter bank lock sets or dual-user electronic keypad locks
- Overhead slotted steel riser shelf or pegboard back-panel kit mounted to continuous counter banks
Technical FAQs
Why choose a 44-inch counter-height MD-7D400 instead of a 59-inch eye-level cabinet?
At 44" (1,120 mm), the MD-7D400 acts as a standing parts-issue counter, clipboard write-up deck, and component inspection surface while keeping sightlines open across the workshop—without sacrificing the 400 lb per-drawer load rating.
Can we link four MD-7D400 cabinets under one seamless countertop?
Yes. Cabinets bolt flush side-by-side through factory-punched chassis knockouts and accept continuous 60", 90", or 120" butcher-block or 304 stainless-steel tops with zero seam gaps.
How many small MRO SKUs can a single MD-7D400 organize?
Outfitting the upper five 3" and 5" drawers with 24- to 36-compartment divider/bin grids easily organizes 150 to 240 distinct small SKUs while leaving the lower 7" and 10" drawers free for heavy valves, motors, and torque tools.
Does the 44-inch model still include the single-drawer anti-tip safety interlock?
Yes. Because a single fully extended 400 lb drawer creates a strong forward cantilever load even at 44" height, the mechanical single-drawer anti-tip interlock is standard on every MD-7D400.
Related Modular Drawer Cabinets Models
59" 9-Drawer 400 lb/Drawer Heavy-Duty Modular Cabinet
Flagship 59" (1,500 mm) 9-drawer heavy-duty cabinet with 400 lb (181 kg) per-drawer load rating, 100% full extension slides, and anti-tip interlock for MRO parts walls.
View Datasheet →CNC BT30/BT40/CAT40/HSK Tool Holder Storage Cabinet
Dedicated 59" CNC tool holder storage cabinet engineered for BT30, BT40, CAT40, CAT50, and HSK63/100 tapers on 400 lb 100% full-extension trays.
View Datasheet →33" 5-Drawer Underbench & Workstation 400 lb Cabinet
33" (840 mm) underbench and workstation 5-drawer cabinet rated to 400 lb (181 kg) per drawer (2,000 lb total) for continuous maintenance workbenches.
View Datasheet →