400 lb / Drawer Heavy-Duty Storage · 100% Full Extension · 15-Minute Formal Quote Turnaround
SECTION Application SpecificationUPDATED 2026-11-22REVIEWED Modular Drawer Cabinet Systems Structural Desk

CNC Tool Holder Storage Cabinets for BT30, BT40, CAT40, CAT50 & HSK Tooling

High-density 400 lb full-extension CNC tool holder storage cabinets with oil-resistant nylon taper sockets for BT30, BT40, CAT40, CAT50, HSK63, and HSK100 shanks.

Precision 5-axis machining centers, horizontal mills, and Swiss-type CNC cells lose spindle accuracy when preset tool assemblies sit exposed on open metal carts where coolant mist, grinding dust, and steel-on-steel contact nick ground tapers. The MD-CNC40 CNC Tool Holder Storage Cabinet encloses 180 to 240 preset assemblies inside a lockable 59” (1,500 mm) heavy-gauge steel housing on 400 lb (181 kg) 100% full-extension trays.

Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project.

MD-CNC40 CNC tool holder storage cabinet showing PA6-GF nylon taper sockets and supported taper matrix

Taper Protection: Glass-Filled Nylon Sockets vs. Raw Steel Racks

Every taper nick transfers runout directly into expensive solid-carbide end mills and high-speed ceramic spindle bearings. Our modular tool trays seat every holder inside replaceable oil- and coolant-resistant glass-filled nylon (PA6-GF) sockets:

  • Zero Metal-to-Metal Contact: Hardened BT, CAT, ISO, HSK, and Capto shanks rest exclusively against non-marring engineered polymer that resists synthetic coolants and tramp oils.
  • Open Bottom Drain Geometry: Each socket features a bottom clearance bore so residual cutting fluid drains cleanly into the tray’s integrated drip lip instead of pooling around pull studs or HSK hollow faces.
  • Removable Carrier Rails: Machinists lift an entire row of 6 to 8 holders straight out of the cabinet tray and transfer the rail onto a mobile setup cart or presetter station without individually unseating tools.

Holder Capacity & Vertical Pitch by Spindle Taper

Use this tray planning matrix to size single-cell or centralized tool-crib MD-CNC40 banks:

Spindle Taper Standard Typical Socket Pitch Holders per 30” × 28.5” Tray Typical Loaded Tray Weight Recommended Tray Vertical Clearance
BT30 / ISO30 2.6” (66 mm) 48–54 holders 160–210 lb (73–95 kg) 7”–8” (175–200 mm)
BT40 / CAT40 / SK40 3.1” (78 mm) 36–42 holders 240–320 lb (109–145 kg) 8”–10” (200–250 mm)
HSK-A63 / HSK-E63 3.1” (78 mm) 36–42 holders 210–290 lb (95–132 kg) 8”–10” (200–250 mm)
CAT50 / BT50 4.2” (106 mm) 20–24 holders 280–360 lb (127–163 kg) 10”–12” (250–305 mm)
HSK-A100 / Capto C6 4.2” (106 mm) 20–24 holders 260–340 lb (118–154 kg) 10”–12” (250–305 mm)

Because even a fully populated CAT50 tray reaches 340–360 lb (154–163 kg), light-duty 150 lb drawer slides deflect and bind within weeks. Full 400 lb (181 kg) telescopic ball-bearing slides keep every tray rolling smoothly under continuous 3-shift production.

400 lb precision telescopic ball-bearing drawer slide supporting heavy steel CNC tool holder assemblies

Combining Tool Trays with Collet & Presetter Drawers

A complete machining-cell tool station stores more than assembled holders. Standard MD-CNC40 builds pair five full-extension CNC tool holder trays with two bottom 4” (100 mm) slotted drawers organized via our Partition & Divider Layout Guide for:

  • ER16, ER25, ER32, and ER40 precision collet sets in grooved foam or steel dividers
  • Replacement retention knobs (pull studs), coolant-through O-rings, and collet nuts
  • Preset torque wrenches, spindle taper wipes, and carbide insert dispensers
  • Optional side-mounted tightening fixture vise for safe tool assembly right at the cabinet

For shops running both stationary tool cribs and mobile presetter-to-spindle changeovers, pair MD-CNC40 wall banks with an MD-MOB400 mobile cabinet fitted with a top BT40/CAT40/HSK carrier insert.

Get a 15-Minute CNC Tooling Layout & Quote

Share your spindle taper standards (BT30, BT40, CAT40, CAT50, HSK63, or HSK100), longest cutter gauge length, total holder count, and delivery postal code in our 15-Minute Formal Quote brief for a custom tray elevation drawing and formal quote.

MATCHING CONFIGURATIONS

Standard & Custom-Engineered Models

View All 5 Models →
MD-CNC40

CNC BT30/BT40/CAT40/HSK Tool Holder Storage Cabinet

Dedicated 59" CNC tool holder storage cabinet engineered for BT30, BT40, CAT40, CAT50, and HSK63/100 tapers on 400 lb 100% full-extension trays.

Full Datasheet →