Dual-Unit Technical Specifications (MD-CNC40)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| External Dimensions (W × D × H) | 30.0" × 28.5" × 59.0" (762 × 724 × 1,500 mm) | Optional 44" (1,118 mm) wide high-capacity machining-center edition |
| Supported CNC Taper Interfaces | BT30, BT40, BT50, CAT40, CAT50, ISO30/40, HSK-A63, HSK-A100, Capto C5/C6 | Interchangeable modular socket rails allow mixed tapers inside the same cabinet |
| Standard Tray Layout | 5× CNC Tool Holder Trays (8"–10" pitch) + 2× 4" Collet/Presetter Drawers | Holds 36–48 BT40/CAT40/HSK63 holders per tray (180–240 holders per cabinet) |
| Per-Tray Load Rating | 400 lb (181 kg) uniform static load | Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project |
| Socket Material | Injection-molded oil- & coolant-resistant glass-filled nylon (PA6-GF) | Zero metal-on-metal taper contact protects spindle ground surfaces and runout accuracy |
| Slide Mechanism | 100% full extension heavy-duty telescopic ball-bearing carriages | Full vertical overhead access to rear-row end mills and boring bars without scraping upper trays |
| Safety & Security | Single-drawer mechanical anti-tip interlock + central keyed cylinder lock | Optional clear polycarbonate locking doors for visual tool-crib auditing |
| Base & Shop Mobility | 4" (102 mm) welded forklift base with leveling feet | Optional heavy-duty 6" polyurethane caster kit for mobile presetter-to-spindle transport |
Target Applications & Operating Fit
- 5-axis vertical and horizontal CNC machining centers running BT40, CAT40, HSK-A63, or HSK-A100 high-speed tool libraries
- Tool-room presetter stations requiring dedicated lower drawers for ER collets, pull studs, torque wrenches, and carbide inserts
- Aerospace, mold-and-die, and medical machining cells where spindle taper cleanliness and sub-micron runout protection are mandatory
- Facilities replacing open A-frame CNC carts with enclosed, lockable, coolant-mist-protected tool holder storage
Structural & Standards Engineering
- Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project
- Snap-in glass-filled nylon taper sockets suspend each holder by its flange or taper shoulder, eliminating steel-on-steel nicks
- Removable CNC tool carrier rails lift straight out of the tray for direct transfer to portable shop-floor tool trolleys
- Integrated bottom coolant drip pan lip beneath slotted tool frames keeps residual cutting oil out of lower collet drawers
- Dedicated top/bottom flat partitioned drawers store pull studs, retention knobs, collet chucks, and presetter calibration bars
5-Parameter Engineering Modification Scope
- Mixed taper tray kits: combine BT30, BT40, CAT40, CAT50, HSK63, HSK100, or Capto C6 inserts row by row
- Extended vertical clearance trays (11"–13" / 280–330 mm) for extra-long boring bars, face mills, and deep-cavity mold cutters
- Inclined 15-degree front presentation frames for ergonomic visual identification of tool numbers and gauge lengths
- Side-mounted tool-assembly tightening vise fixture bracket for rapid collet and retention-knob changes
- Electronic PIN or RFID card lock upgrade for controlled high-value PCD and solid-carbide tooling access
Technical FAQs
How many BT40, CAT40, or HSK-A63 tool holders fit in a single MD-CNC40 cabinet?
Each 30" × 28.5" tray holds 36 to 42 BT40, CAT40, or HSK-A63 holders depending on tool body diameter spacing. A 5-tray MD-CNC40 cabinet stores 180 to 210 mounted holders while retaining two 4" drawers for collets and pull studs.
Will heavy CAT50 or long boring bar assemblies overload the 400 lb drawer slides?
No. Even a dense CAT50 tray holding 24 tool assemblies averaging 14 lb each totals 336 lb (152 kg)—comfortably below the 400 lb (181 kg) uniform static load rating at 100% full extension.
Can we mix CAT40 and HSK-A63 holders inside the same cabinet?
Yes. Each tray uses modular replaceable steel cross-rails and snap-in nylon sockets, so you can dedicate individual trays—or even individual rows within one tray—to different spindle standards.
How do the nylon sockets protect precision ground spindle tapers?
The injection-molded glass-filled nylon (PA6-GF) inserts resist synthetic coolants and tramp oil while cushioning the hardened steel taper, preventing burrs and fretting marks that degrade spindle runout.
Related Modular Drawer Cabinets Models
59" 9-Drawer 400 lb/Drawer Heavy-Duty Modular Cabinet
Flagship 59" (1,500 mm) 9-drawer heavy-duty cabinet with 400 lb (181 kg) per-drawer load rating, 100% full extension slides, and anti-tip interlock for MRO parts walls.
View Datasheet →44" 7-Drawer Counter-Height 400 lb MRO Cabinet
44" (1,120 mm) standing counter-height 7-drawer MRO cabinet rated to 400 lb (181 kg) per drawer with 2,800 lb total capacity and top parts-issue deck.
View Datasheet →33" 5-Drawer Underbench & Workstation 400 lb Cabinet
33" (840 mm) underbench and workstation 5-drawer cabinet rated to 400 lb (181 kg) per drawer (2,000 lb total) for continuous maintenance workbenches.
View Datasheet →