Dual-Unit Technical Specifications (MD-9D400)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| External Dimensions (W × D × H) | 30.0" × 28.5" × 59.0" (762 × 724 × 1,500 mm) | Standard North American eye-level footprint; optional 36" (914 mm) or 44" (1,118 mm) wide housings |
| Drawer Count & Usable Heights | 9 Drawers: 3× 3" (75 mm), 3× 5" (125 mm), 2× 7" (175 mm), 1× 10" (250 mm) | Configurable 1" (25 mm) vertical incremental drawer stack up to 53" usable height |
| Per-Drawer Load Capacity | 400 lb (181 kg) uniform static load | Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project |
| Total Cabinet Payload | 3,600 lb (1,633 kg) across 9 drawers | 14-gauge (2.0 mm) seam-welded cold-rolled steel housing with reinforced vertical channels |
| Drawer Slide Extension | 100% full extension telescopic precision ball-bearing slides | Unobstructed top-down access to rear partition compartments without tipping or tilting bins |
| Safety Interlock & Locking | Mechanical single-drawer anti-tip interlock + central cylinder lock | Prevents simultaneous opening of two or more drawers; optional keyed-alike bank cylinders or keypad lock |
| Interior Partition Matrix | Slotted drawer walls on 1" (25 mm) pitch | Accepts galvanized steel longitudinal partitions, snap-in cross dividers, grooved trays, and plastic bin boxes |
| Base & Relocation Interface | Integrated 4" (102 mm) welded forklift base with removable front/rear kick plates | Standard floor-anchoring tabs; powder-coated RAL 5015 industrial slate blue & RAL 7016 charcoal |
Target Applications & Operating Fit
- High-density MRO spare-parts cribs consolidating 3–4 bays of open 36" industrial shelving into one 59" cabinet footprint
- Heavy machining, die-cast, and aerospace maintenance facilities storing bronze bearings, hydraulic valves, carbide inserts, and torque tooling
- Direct dimensional and load-class benchmark expansion alongside existing Lista HS/SC, Stanley Vidmar 59", and Rousseau R-Series banks
- Multi-cabinet parts walls (4 to 24 units) requiring uniform eye-level top sightlines, central key control, and forklift base relocation
Structural & Standards Engineering
- Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project
- Full-width anodized aluminum drawer handles with angled clear acrylic label shields and barcode-ready paper inserts across all nine drawers
- Continuous 14-gauge welded steel outer shell resists racking deflection even when top and bottom drawers are fully loaded with dense fasteners
- Slotted perimeter walls on all four drawer sides accept tool-less divider reconfigurations without removing the drawer from its slide carriage
- Removable front and rear forklift base cover plates permit safe loaded-or-unloaded relocation via standard pallet jack or forklift tines
5-Parameter Engineering Modification Scope
- Custom drawer height stacks: 7 to 13 drawers using 2", 3", 4", 5", 6", 8", 10", or 12" front heights within the 59" housing
- Housing widths: standard 30" (762 mm), extra-wide 36" (914 mm), or double-width 44" (1,118 mm) for oversized dies and bar stock
- Locking upgrades: keyed-alike multi-cabinet bank sets, master-keyed hierarchy, or electronic PIN/RFID audit-trail lock bars
- Pre-kitted interior packs: 16-, 24-, 36-, or 64-compartment steel divider kits, oil-resistant ribbed mats, and removable plastic cup bins
- Finish colors: standard industrial slate blue/charcoal (RAL 5015 / RAL 7016), light gray (RAL 7035), safety red, or custom plant RAL match
Technical FAQs
Can every drawer in the MD-9D400 hold 400 lb (181 kg) at 100% full extension simultaneously?
Every individual drawer is rated for 400 lb (181 kg) uniform static load at 100% full extension, giving a 3,600 lb (1,633 kg) combined cabinet payload. The standard single-drawer anti-tip interlock ensures only one loaded drawer extends at a time to protect operators from forward tip-over.
How does the MD-9D400 compare dimensionally with 59-inch Lista, Stanley Vidmar, and Rousseau cabinets?
The MD-9D400 uses the industry-standard 30" W × 28.5" D × 59" H (762 × 724 × 1,500 mm) eye-level envelope and 400 lb full-extension drawer class, enabling clean side-by-side aisle alignment when expanding existing Lista HS/SC, Stanley Vidmar 59", or Rousseau R-Series storage rows.
Do I have to anchor the MD-9D400 to the concrete floor?
While the mechanical single-drawer interlock greatly reduces tip-over risk during single-drawer operation, we recommend anchoring 59" cabinets to the concrete slab or bolting adjacent cabinets together into a continuous bank for high-load MRO walls and seismic zones.
Can the interior drawer dividers be reconfigured after installation?
Yes. Every drawer wall is punched on a 1" (25 mm) modular grid so maintenance teams can shift longitudinal partitions, snap-in steel dividers, or lift-out plastic bin boxes in minutes as SKU dimensions evolve.
Related Modular Drawer Cabinets Models
CNC BT30/BT40/CAT40/HSK Tool Holder Storage Cabinet
Dedicated 59" CNC tool holder storage cabinet engineered for BT30, BT40, CAT40, CAT50, and HSK63/100 tapers on 400 lb 100% full-extension trays.
View Datasheet →44" 7-Drawer Counter-Height 400 lb MRO Cabinet
44" (1,120 mm) standing counter-height 7-drawer MRO cabinet rated to 400 lb (181 kg) per drawer with 2,800 lb total capacity and top parts-issue deck.
View Datasheet →33" 5-Drawer Underbench & Workstation 400 lb Cabinet
33" (840 mm) underbench and workstation 5-drawer cabinet rated to 400 lb (181 kg) per drawer (2,000 lb total) for continuous maintenance workbenches.
View Datasheet →