Dual-Unit Technical Specifications (MD-MOB400)
| Parameter | Engineering Specification | Reference / Notes |
|---|---|---|
| External Dimensions (W × D × H) | 30.0" × 28.5" × 39.0" (762 × 724 × 990 mm) | Includes 6" (152 mm) casters and integrated forklift sub-frame; 34" width with tubular push handle |
| Drawer Count & Usable Heights | 6 Drawers: 2× 3" (75 mm), 2× 5" (125 mm), 1× 6" (150 mm), 1× 8" (200 mm) | 30" (762 mm) usable drawer stack balanced to keep center of gravity low during transport |
| Per-Drawer Load Rating | 400 lb (181 kg) uniform static load | Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project |
| Dynamic Rolling Capacity | 2,400 lb (1,088 kg) total dynamic load | 4× heavy-duty 6" × 2" (152 × 50 mm) non-marking polyurethane-on-iron casters (2 rigid + 2 total-lock swivel) |
| Forklift Relocation Interface | Integrated 7-gauge welded dual forklift pockets beneath chassis | Permits rapid loaded lifting between hangar levels, mezzanine decks, or field-service flatbeds |
| Transit Safety System | Single-drawer anti-tip interlock + individual spring-loaded travel latches | Every drawer locks closed automatically on push-in, preventing accidental roll-out over floor seams or ramps |
| Top Deck & Push Ergonomics | 1.5" (38 mm) 3-sided steel retainer top with oil-resistant mat + tubular side handle | Optional butcher-block or stainless-steel top + fold-down side writing shelf |
| Chassis & Finish | 14-gauge seam-welded steel body + 7-gauge mobile base frame | Chemical-resistant powder coat in slate blue (RAL 5015) & charcoal (RAL 7016) with corner bumpers |
Target Applications & Operating Fit
- Aircraft hangar line-maintenance crews rolling calibrated inspection tooling, rivets, and hydraulic kits directly to aircraft stands
- Heavy-truck, rail, and port-crane maintenance depots moving high-mass impact sockets and puller sets across multiple service bays
- Plant millwright and shutdown teams transporting pre-kitted preventive-maintenance spares by forklift to remote production lines
- CNC job shops deploying mobile setup stations carrying fixtures, vise jaws, and tooling between machining centers
Structural & Standards Engineering
- Engineered for 400 lb (181 kg) per-drawer uniform static load, 100% full extension, and single-drawer anti-tip interlock operation; cycle-load test sheets available per project
- Dual-mode mobility: push effortlessly across concrete slabs on 6" polyurethane casters or hoist fully loaded via welded 7-gauge forklift pockets
- Individual concealed one-hand travel latches inside each aluminum pull keep drawers securely retained over expansion joints and dock plates
- Total-lock swivel casters simultaneously lock both wheel rotation and swivel raceway to create a rock-solid bay workstation
- Non-marking polyurethane treads protect epoxy hangar floors and resist shop oils, metal swarf, and hydraulic fluids
5-Parameter Engineering Modification Scope
- Heavy-duty 8" pneumatic or shock-absorbing spring-loaded caster upgrade for rough outdoor aprons and tarmac transit
- Removable CNC tool-holder tray insert (BT40/CAT40/HSK63) in top drawer for mobile machining setup carts
- Bolt-on vise mounting plate, fold-down 16" side tray, and magnetic spray-can / paper-towel side caddy
- Tow-bar hitch and four-wheel steer option for tugger-train deployment across large assembly plants
- Custom fleet bay numbering decals, keyed-alike supervisor locks, and two-tone FOD tool-shadowing foam sets
Technical FAQs
Can the MD-MOB400 be lifted by a forklift while fully loaded with tools?
Yes. The 7-gauge welded forklift base pockets tie directly into the structural chassis corners, allowing safe loaded relocation up to the 2,400 lb (1,088 kg) dynamic capacity rating when drawers are latched and locked.
How do the drawers stay closed when rolling over concrete floor expansion joints?
Each drawer handle integrates a spring-loaded one-hand release latch that automatically engages a steel catch on closure—working alongside the central key lock and single-drawer anti-tip interlock.
Why use 6-inch polyurethane-on-iron casters instead of standard rubber wheels?
6" × 2" polyurethane-on-cast-iron treads carry 2,400 lb dynamic loads with low rolling resistance, will not flat-spot under parked heavy loads, resist cutting oils and Skydrol, and will not scuff coated hangar floors.
Can the MD-MOB400 be ordered with a butcher-block or stainless-steel top for mobile repair work?
Yes. You can replace the standard 3-sided retainer mat deck with a 1.75" maple butcher-block top, a 14-gauge 304 stainless-steel top, or a reinforced vise-ready steel plate during your 15-minute formal quote.
Related Modular Drawer Cabinets Models
59" 9-Drawer 400 lb/Drawer Heavy-Duty Modular Cabinet
Flagship 59" (1,500 mm) 9-drawer heavy-duty cabinet with 400 lb (181 kg) per-drawer load rating, 100% full extension slides, and anti-tip interlock for MRO parts walls.
View Datasheet →CNC BT30/BT40/CAT40/HSK Tool Holder Storage Cabinet
Dedicated 59" CNC tool holder storage cabinet engineered for BT30, BT40, CAT40, CAT50, and HSK63/100 tapers on 400 lb 100% full-extension trays.
View Datasheet →44" 7-Drawer Counter-Height 400 lb MRO Cabinet
44" (1,120 mm) standing counter-height 7-drawer MRO cabinet rated to 400 lb (181 kg) per drawer with 2,800 lb total capacity and top parts-issue deck.
View Datasheet →